Last additions - CR13-Old Kid |
Used plywood stand to cut out parts on108 viewsOld KidAug 16, 2009
|
|
Made but not finished a cradle to store and build the boat on.100 viewsOld KidAug 16, 2009
|
|
Frames cut and battens glued to top edges.93 viewsOld KidAug 16, 2009
|
|
Glued panels on the stands, no crawling on the floor.86 viewsOld KidAug 16, 2009
|
|
Panels glued and weighted down on top of plastic sheet.88 viewsOld KidAug 16, 2009
|
|
Used two plywood stands together to mark and cut two panels at one time.88 viewsOld KidAug 16, 2009
|
|
Flipped hull and checked measurements.129 viewsOld KidAug 16, 2009
|
|
Side view of taped hull104 viewsOld KidAug 16, 2009
|
|
Installed bottom panels with zip ties and taped seams.107 viewsOld KidAug 16, 2009
|
|
Leveling everything up and put in a few screws to hold the panels.103 viewsOld KidAug 16, 2009
|
|
Starting to put together the panels and frames.97 viewsOld KidAug 16, 2009
|
|
Took a long time to make but the daggerboard is to specs.91 viewsOld KidAug 16, 2009
|
|
|